In Stock
 

Ropes Edge The Edge Kick Plate Management System

The Edge is designed for use on the varying sizes & depths of “Kick-Plate” and other structural plate metal found on industrial & commercial work sites.

During the common practice of rigging steel slings over kick-plate to capture the rated structural steelwork below, they are often kinked & damaged due to the abrupt turning of the sling over the kick plate. Kinking introduces a significant loss of strength as well as the costly and regular need for replacement when damaged.

The Edge offers an increased bend radius for the sling to rest upon and retain the full strength of the wire ropes rating.

Add to quote
SKU: REEDGE Categories: , Tags: , ,
 

Description

  • Is the safest & most efficient way to Rigg nylon rope and wire slings around Kick-Plate and the structural steel.
  • Is light to carry on your harness, thus reducing the effects of fatigue in the physically demanding work arenas of Rope Access & Rope Rescue.
  • May be used with rope dia’s up to 15mm. The clevis pin secures the rope or sling within the product offering an additional level of protection.
  • Can be used in many different configurations after a full & complete assessment of risk for the specific application.
  • May be used with static, low stretch & dynamic kern-mantle rope.

TECHNICAL SPECIFICATIONS

  • Size: 62mm x 90mm
  • Weight: 1.1oz
  • Conformity: Non-PPE
  • Tensile Strength: 
  • Conformity: non PPE
  • Tensile Strength: 48 MPa
  • Elongation: approx. 15% – 20%
  • Impact Resistant to: 1247 flbs/ sq. inch
  • Melting Point: 175°C
  • Low-Temperature Limit: -40°C (short term duration)
  • Material: PA 12 Nylon

MANUAL & RESOURCE DOWNLOADS

MAINTENANCE & CARE

  • Wash The Vortex with warm soap & water and keep away from sources of high heat and chemical contamination.